Our Steiger and AGCO White hub applications are built for large tractors and articulated units requiring high torque and stability. Each hub is engineered to maintain alignment under heavy drawbar loads and long-hour operation.
Manufactured from heat-treated steel and precision-balanced for dependable performance, these hubs deliver the durability and accuracy demanded by high-horsepower equipment.
| Tractors | Axle Diameter (in) | Axle Diameter (mm) | Tractor Axle Configuration | 10-Bolt Wedge-Lok (Offset Flanged Hub) | 10-Bolt Wedge-Lok (Centered Flanged Hub) | 10-Bolt U-Bolt Hub Stock # | 9-Bolt U-Bolt Hub Stock # |
|---|---|---|---|---|---|---|---|
| Steiger | |||||||
| WILDCAT RC210 (Order K-13 steel key for this application) | 3¼” | 82.55 |
|
– | – | 91EM13 | – |
| BEARCAT 1000, COUGAR 1000, PUMA 1000 | 4″ | 101.6 |
|
1000E1450 | 2000E1450 | – | N/A |
| White & AGCO White | |||||||
| 2-85, 2-88, 2-105, 2-110, 4-150, 4-175 | 3 3/16″ | 80.96 |
|
– | – | 91EM40 | N/A |
| 6710, 6810 | 3¼” | 82.55 |
|
– | – | 91EM13 | – |
| 6124, 6144, 8310*, 8410* | 3¾” | 95.25 |
|
1000E30 | 2000E30 | – | N/A |
| (AGCO-White: 6125, 6145, 6175*, 6195*, 6215), 140*, 145, 160, 170, 185, 195, 225; 135, 2-180, 2-185, 2-40, 2-425, 270, 8310*, 8410* (see notes) | 3⅞” | 98.425 |
|
1000E88 | 2000E88 | 91EM24 | N/A |
| 8510, 8610, 8710, 8810; Fendt 900 Series, 920, 924, 926 | 4.331″ | 110 |
|
1000E811M | 2000E8110 | – | – |
* These models have been produced with more than one axle diameter.
Please verify axle diameter with customer before ordering.
** These models have been produced with two different axle configurations, but with the same axle diameter.
Verify that the tractor axle is a wedge-type configuration and not a keyway-type configuration.
† To install 1000E88 hub & 2000E88 hub, the two loose keys in the tractor axle must be shortened (cut off).
‡ To install 91EM42 one of the two loose keys in the tractor axle must be shortened (cut off).
